High-Efficiency Screw Compressor Systems
Engineered with high-temperature tolerance, multi-stage dust filtration, and intelligent frequency conversion to survive Iraqi desert climates and industrial demands.
Navigating Iraq's Expanding Industrial & Energy Landscape
The Republic of Iraq is experiencing a transformative wave of industrial rehabilitation and infrastructure modernization. From the high-yield oilfields of Basra, Zubair, and Rumaila to the manufacturing corridors of Baghdad and the burgeoning commercial districts of Erbil and Sulaymaniyah in the Kurdistan Region, reliable compressed air is recognized as the "fourth utility" essential for automated production.
Operating rotary screw compressors in Iraq presents severe mechanical challenges. Summer ambient temperatures regularly exceed 50°C (122°F), accompanied by fine particulate silica dust and continuous 24/7 duty cycles. Traditional reciprocating piston units frequently suffer from thermal overheating, rapid valve carbonization, and catastrophic pressure drops.
Our engineered twin-screw rotary compressors are developed specifically to master these climatic realities. Utilizing oversized tropicalized aluminum radiators, IP55 heavy-duty drive enclosures, dual-stage air filtration, and advanced synthetic lubricant formulations, our machinery delivers sustained volumetric output without thermal tripping.
- Tropicalized heat dissipation systems rated for up to 55°C continuous ambient operation.
- Heavy-duty inlet pre-filtration to handle Iraqi dust storms and sand particulates.
- High-efficiency German-profile twin screw airends providing up to 75m³/min continuous flow.
Why Iraqi Industries Choose Our Twin-Screw Systems
Cutting-edge automation, AI-optimized rotor profiles, and unmatched power efficiency designed for lowest Total Cost of Ownership (TCO).
Permanent Magnet VFD
Adjusts motor speed dynamically according to real-time air demand. Eliminates unload power waste, generating 30% to 45% electricity savings compared to fixed-speed units across Iraqi industrial parks.
IP54 / IP55 Heavy Protection
Fully sealed electrical enclosures and drive motors prevent fine silica sand and moisture ingress, safeguarding sensitive internal electronic microprocessors from harsh ambient exposure.
Two-Stage Compression
Reduces the compression ratio of each stage, minimizes internal back-leakage, lowers bearing thermal stresses, and increases overall air delivery by 15% per kilowatt of grid electricity.
Powering Critical Sectors Across Iraq
From upstream petrochemical installations to municipal bottling facilities, our compressed air technologies provide unwavering performance.
Oil & Gas Refineries
Supplying continuous, dry, instrumentation-grade compressed air for pneumatic valves, flare systems, pipeline purging, and nitrogen generation in Basra and Kirkuk fields.
Cement & Building Materials
Delivering high-volume low-pressure air (3-5 bar) for pneumatic silo conveying, fluidized transport, dust filtration, and heavy block manufacturing plants.
Food, Beverage & Pharma
Combining oil-free and oil-cooled screw compressors with refrigerated air dryers and ceramic filters to ensure ISO 8573-1 air purity in packaging and bottling lines.
Steel, Metalwork & Automotive
Driving high-pressure CNC plasma cutters, sandblasting chambers, laser cutting systems, and automated assembly arms in central Baghdad industrial zones.
Industrial Screw Compressor Series Matrix
Standard and custom configurations available for immediate sea freight shipping to Umm Qasr Port or overland transit.
| Series Model | Motor Power | Working Pressure | Air Delivery (FAD) | Cooling Mode | Recommended Iraqi Application |
|---|---|---|---|---|---|
| PM-VFD Compact | 15kW / 20HP | 7.0 – 10.0 bar | 2.3 – 2.8 m³/min | Air Cooled | Automotive Workshops, Light Assembly, Baghdad Workshops |
| ETSV-Two Stage | 37kW / 50HP | 8.0 – 12.5 bar | 6.2 – 7.1 m³/min | Dual Air Cooled | Plastic Injection, Textile, Food Packaging Facilities |
| IP55 Heavy Duty | 55kW / 75HP | 8.0 – 13.0 bar | 9.5 – 10.8 m³/min | Tropicalized Air/Oil | Oilfield Instrument Air, Erbil Construction Sites |
| ETZV Low Pressure | 110kW / 150HP | 3.0 – 5.0 bar | 18.5 – 22.0 m³/min | Air/Water Cooled | Cement Conveying, Grain Fluidization, Wastewater Treatment |
| High-Power Mining | 132kW / 180HP | 8.0 – 13.0 bar | 21.0 – 24.5 m³/min | Water/Air Cooled | Basra Heavy Refining, Quarry Drilling, Heavy Steel Works |
Shanghai Honest Compressor Co., Ltd.
Shanghai Honest Compressor Co., Ltd. is a British-owned enterprise founded in early 2004. The production address is located at NO. 355 Jiajian Branch Road, Malu Town, Jiading District, Shanghai, China. It is a large-scale manufacturing enterprise specializing in the production of twin-screw air compressors in China. At the same time, it is also an important supplier of complete air system solutions.
We provide various types of piston air compressors (low pressure, medium pressure, high pressure, oil-free air compressors), screw air compressor systems (3KW-480KW various screw air compressors, gas separation equipment, refrigerant compressors, cold dryers, filters, ceramic membrane filtration systems) and various equipment accessories and consumables.
We fully implement strict management throughout the entire manufacturing process, strictly monitor product quality and environmental protection, and the company has passed the ISO9001:2015 quality management system.
We pay attention to market trends in technology research and development, close to the needs of users, actively absorb the advantages of domestic and foreign brand performance structures, and integrate our own features of convenient maintenance, so that the air compressors we produce have more perfect structures, better performance, and energy saving and consumption reduction. Obviously, after the test of the National Compressor Inspection Center, the energy consumption data is superior to the national energy-saving standard, and can provide users with various series of 3kW--480kW, air-cooled and water-cooled screw air compressors with a flow rate of 0.5m3/min-75m3/min.
There are multiple models and categories of machines for users to choose from, as well as permanent magnet variable frequency air compressors, oil-free machines, mobile air compressors, etc., and can provide a complete set of construction plans for air compressor stations with design and manufacturing, user training, and service. In order to facilitate contact and communication between customers and enterprises, the company has opened a dedicated free service hotline of 400-705-9168, supported by comprehensive engineering and exporter consultation teams.
Industrial Product Lineup for Export
Select from our comprehensive range of high-efficiency screw compressors and integrated refrigerated air drying units.
Technical & Export Procurement FAQs for Iraq
Everything you need to know about importing, operating, and maintaining industrial screw air compressors in Iraq.
All our export machines destined for the Middle East are equipped with heavy-duty oversized aluminum cooling radiators, high-temperature synthetic coolants, and intelligent thermal bypass valves to ensure continuous operation without emergency shutdowns even when ambient temperatures reach 55°C.
We customize electric motor configurations to match Iraq's industrial standard 380V/400V 50Hz 3-phase power supply. Our control panels also feature wide-voltage tolerance inverters and surge suppression to handle localized power fluctuations and generator switching.
Direct ocean container shipments from Shanghai Port to Umm Qasr Port typically take 22 to 30 days. We provide full export packing, seaworthy fumigated wooden crating, Certificate of Origin (CO), and COC conformity certification required for customs clearance in Iraq.
Yes. We supply comprehensive 2,000-hour and 4,000-hour preventive maintenance kits (oil filters, air filters, air-oil separators, and valve seals) together with machine shipments, ensuring uninterrupted operations for your plant.